|
|
CMS-Analyzers
|
CMS Analyzers
|
|
|
|
Tip: Click product
picture and/or name for additional information |
|
|
|
|
|
 |
 |
 |
|
|
The Chip
Measurement System (CMS) is based on Draeger's 60+ years of
dry chemical reaction technology, most prominently used in
Draeger-Tubes®.
CMS takes this technology to the next level with an advanced
electronics and sampling system, which delivers accuracies
of + 4% to 10% of measured values for most gases and
vapors.
CMS does not require gas calibration. All measurement and
calibration information is stored on a bar code on the CMS
Chip. An electronics and leak check is performed before each
measurement so you are assured of accurate indications every
time. Powered by four "AA" cells, the CMS will deliver about
100 measurements per battery change. Popular applications
include TWA screening, confined space entry, and emergency
response.
Click Here to
Download the Draeger-CMS Brochure |
|
| |
Specifications |
 |
Size: 8.0"
x 3.6" x 1.7" (205 x 92 x 45 mm) |
|
|
Weight: 25.6 oz. (730 gr.) |
|
|
Ingress Protection:
IP-54, protected against dust and water |
|
|
Data Capacity:
Stores up to 50 measurements |
|
|
Power Supply: 4
x 1.5 Volt (AA) alkaline batteries |
|
|
Battery Duration:
450 minutes of analysis time (typically greater than 100
measurements) |
|
|
Approvals UL:
UL: Class I, Division 1, Groups A-D, T4 / CSA:
Class I, Division 1, Groups A-D, T4
CENELEC: EEx ib IIC T4 / MSHA (Permissible Gas
Analyzer) |
|
|
Operational Temperature: 32-104'F (0-40'C) |
| |
|
|
|
|
Includes Analyzer, 4 AA Alkaline Batteries and 3mm Allen Wrench
|
CMS Analyzer with Factory Installed Remote Pump; Includes 3 meter extension hose with Adaptor and Float Probe
|
Includes Analyzer Set, Remote System, Telescopic Probe,10 Chips and Carrying Case
|
Includes Analyzer Set, Remote System, Telescopic Probe and Carrying Case
|
Includes Analyzer Set, 4 Chips and Nylon Transport Case
| |
|
 |
| |
|
|
 |
|
|
| |
|
|
Our Preferred
Shipper: |
|
| |
|
Secure Transactions by: |
|
|
|
|